Showing posts with label tricks. Show all posts
Showing posts with label tricks. Show all posts

Friday, September 23, 2011

Remix a Track

Reeeeemmiixxx. Screenshot by Ross Federman
Reeeeemmiixxx. 
So you want to take a stab at making a remix? While Greg Gillis didn't just pick up his laptop and become Girl Talk—there is a methodology to the process. But it involves steps that anyone can learn in order to create custom mash-ups and enhanced tracks. Here’s a breakdown of what you’ll need to consider, by DJ Mr. F AKA Ross from Tally Hall.
This is part of a Wiki anyone can edit. If you have tips for making next level beats, please log in and contribute.

Contents

 [hide]

What you’ll need

Audio

This may seem pretty straightforward, but there’s a lot to consider here. At the very least, you’ll need to get your hands on the vocal stem, or vocal tracks from the original song. You may want more; perhaps you want the remix to also include the original guitar or keyboard lines, in which case you’ll want those stems as well.
You can get stems a variety of ways, but depending on what you want it may require some hunting. One option is to contact the label or the band directly to acquire them. Otherwise, you may want to scour the internet to find them. And if all else fails, it's usually pretty easy to find acapellas online. (Note: You'll only have the vocals in that case, but don't let that discourage you. This method tends to lead to the most creative remixes.)
You’ll also need audio sources of your own to add to what you use of the original mix. This can be anything from individual drum note samples (snare hits, clap samples from a Roland 808), to full-on bass line loops, drum loops, or better yet, your own instruments (assuming you have the means to record them properly).
You can make samples yourself, recording acoustically and modifying the sounds to achieve exactly what you want to hear. However most music programs will come with banks of them. Logic and Reasonfor example will come loaded with thousands of samples to choose from. And if you're up for a little searching in the area of hazy legality, you can often find downloads for them online by searching for keywords like "Samples", "Drum kits", "production kits" etc. A good place to start your search iswww.hiphopisread.com.

Software

You’ll want a good audio editing and mixing program. I use Apple’s Logic, and swear by it. However ProTools, Ableton, Cubase, and Reason are also very popular and will do the trick. I prefer Logic because it’s a great middle ground for digital production and live audio recording. ProTools is still the industry standard for use with large studios and multi-track recording consoles; Ableton seems to be a favorite for those who work entirely within their computers (no real audio capturing). Logic offers the best of both worlds, and if you’re a Mac user already, it will seem incredibly intuitive.
The best and most comprehensive programs are not free and certainly not cheap. But you may be able to find demo versions that will allow you to try the programs out before making a big investment. Many of the digital interfaces come with a free version of Protools LE or a similar "light" version of recording software.

Getting started

Plan ahead

Before you jump in and start toiling away, think about what you want to accomplish. What does the original song sound like, and how do you want your remix to compare to that? In general, most people would answer that with, “It needs to be dancier.” This is fine, but not all remixes need to be dance remixes, and even if that’s what you decide, there are many dance styles. Perhaps you want to go the more modern route, using mostly synthesizers, or maybe you want to shoot for a Motown feel, adding some horns and background vocals to the mix.

Create your session

Now it’s time to get mixing. You’ll want to begin by adding the vocal stem (as well as any other original stems as you decide) into your program. Each one should be its own track. It’s important that you learn the proper techniques for using whichever program you choose.

Set your tempo

Since much of the audio you’ll use will be snapped to a grid of measures and beats, or full loops, if the tempo set in your program does not line up with the original audio, things will go awry fairly quickly. Some programs such as Ableton will detect the tempo for you automatically, however programs often have difficulty doing this when there is no apparent beat. This is usually the case when you're dealing with stems that do not include a drum track.
My advice is to use the original song to detect the beat, or to use your eyes and ears to sync it up (you'll be able to clearly see the beat by looking at the drum hits versus your program's grid, and you'll also be able to hear how in-sync the drum hits are with the metronome in your program). When all else fails, if you're very close, but it seems to get off every phrase, verse, or just somewhere in the middle of the song, you can always cut up the tracks into smaller pieces, working one or two measures at a time, and nudge them until they sync into the beat.
Pro tip: Trust your ears! Nothing will give you better results than listening to the flow of the original track and making sure that the stems or vocal tracks line up with your remix tracks in a similar fashion.

Remixing

Adding your beat

Once you’ve determined what you’ll be using of the original track, it’s time to begin adding your own audio to the mix. I prefer to start with drums. It’s common to find drum loops and simply add those in, however there is a lot more creativity to be found by getting your hands on individual samples and placing them where you’d like in order to create a beat from scratch. Within Logic, there are thousands of Apple Loops, which are a great tool, and can be easily placed right into your track without even having to look outside of the program. Just keep in mind that if everyone only used Apple Loops, we’d start hearing a lot of the same sounds on every remix out there. While some of the best hits of the decade have relied on these (Rihanna’s Umbrella uses Apple Loops’ “Vintage Funk Kit 03”), I’d sure get sick of it if I heard it on 25 other songs and remixes all the time.
So be creative — use standard loops some of the time, or to help foster ideas, but try to avoid using stock loops for every part. However you choose, making a solid foundation of the beat will help to guide the rest of the parts as you move forward.

Adding your bass

Generally you’ll want to move onto the bass line next. This can be achieved through software instruments (most of these programs have great built-in synthesizers and a bank of solid bass tones to choose from). Again, the stock tones may be awesome, but it will pay off to tweak them a little. Make sure it’s just the right sound that you want to hear in your remix. From there, it’s merely a matter of hooking up a simple midi controller, and playing in the parts. Logic even allows you to use your qwerty keyboard to specify notes if you’re feeling especially thrifty. Though, if you have the means to get your hands on a real analog synthesizer, or you can convince your bass player friend to come in and play some funky licks for you on his old Rickenbacker 4000, more power to ya.

Explore

Once you’ve got your drums and bass, you can start exploring a little more. Consider adding more auxiliary percussion, synth pads, string, arpeggios, you name it. And as you discover new sounds that you want to add, keep in mind the overall structure. Maybe the drums should cut out for a section, or the bass line should change up between the verses and the choruses. The more variety and creativity you use, the more alive your remix will become.

Editing

Perhaps you don’t really like how short the original version of a song is? Or how long it is for that matter. In the words of Professor Farnsworth, “Good news everyone!” It’s your remix. Feel free to chop the song up however you want to, add a few choruses to the end, or even a long noodling synth solo in the middle if it so moves you.

Mixing

The last and often toughest part is achieving your final mix, for which you should research and understand the basic concepts of mixing. Learn how to use equalizing, compression, limiters, delay, reverb, and how to create sub-mixes before you jump and start moving faders around. The basic idea however is that you’re trying to create a space for every part of your remix. Its important that each instrument or track have somewhere it can sit in the mix where it’s not competing with everything else to be heard. And as a general rule of thumb, if you can’t hear something as well as you’d like, turn everything else down a little before you start turning things up.
Here's a sample I made with Ryan Brady to give you a taste of what you can do:

How to set your remix apart

Thanks to the digitizing of this entire process, more people than ever are trying their hand at being music producers. It’s important to remember that this is an art form, and the more unique ideas you have to offer to the craft, the better off you’ll be. As I mentioned before, try to avoid using all simple loops. Or at the very least, learn to edit and chop the loops into smaller pieces to create your own loops. Also, consider what certain delay and reverb effects can do to liven things up a bit. One of my favorite tricks is running some of the keyboard lines through a guitar amp, and getting some nice gainy spring reverb on them. Basically, have fun and explore. The more you attempt to achieve interesting and creative sounds, the more interesting and creative your remix will be. And don’t get discouraged if you think you have the greatest idea, but it doesn’t turn out quite right. I can’t tell you how many times I’ve thought that a certain part would sound great with a tremolo effect on it, only to be incredibly disappointed. All that means is that it’s time to try something else.
And always remember that your ears are your greatest asset. Learn how to really use them, to actively listen, to know what you want to hear and what you need to do to hear it.

Wednesday, September 7, 2011

Set Up a Wi-Fi Network

Setting up a Wifi network will allow all your computers (and any guests you want to share your network with) to get online without needing to plug in an ethernet cable. A wireless network can also make it easy to stream music and video to any device on the network. Still got some old PCs that don't have wireless cards? That's okay, most wifi routers have a few ethernet ports as well.
Wireless router image by nrkbeta via FlickrBefore we get started building the network, you will need to purchase a wireless router, as well as some wireless network interface cards if your computers don't already have them built in.
Once you have your router the next step is choosing a good location. Try to install your router in a central location so that every room in your house is covered by the wifi signal.
To set up the network, follow these steps:

Contents

 

Step 1: Connect Everything

Connect your existing modem to the wireless router using an Ethernet cable (be sure to connect the modem to the port labeled "Internet" on most routers, otherwise you may not be able to connect to the internet. Refer to the documentation of your router). This moves the internet connection from your modem to the wireless router. Once that's done, plug your PC into the back of the router using the Ethernet jacks. We'll need this connection to configure the wifi network.
A sample wireless router and cable modem setup. Image by purecanesugar via Flickr
A sample wireless router and cable modem setup.

Step 2: Turning it on

Turn on your modem first, then the wireless router and finally the computer. The order is important since each successive device need to to detect the connection to the one that precedes it in the chain.

Step 3 Set up the network

Check the documentation that came with your wireless router for the default IP address used by the device. Launch your computer's Web browser and head to IP address of the router.
You should see a login window requiring a username and password. The default values should be in your router's documentation.
Once you've logged in, you'll see your router's settings page. The first step is make sure you change the default admin password so other users won't be able to login to the settings page and reconfiguring the router.
The next thing you'll probably want to do is changing the SSID value of the router. This is the name broadcasted by the router to identify it across the network. Chose a unique SSID name and save your changes (this will likely reboot the router).
Scan for wireless networks and see which channels are in use. Try to find a free one, or one with minimal interference. In channel 1-11 a channel is only completely free when there is nothing on the channel and three channels up or down, so 'minimal interference' is usually what you have to settle for. The tool you use to find your network from your laptop might list channels and some idea of signal strength of other networks. Or you could use a dedicated wireless scanning application. For Windows versions: use Netstumbler scanning software, for Linux: use kismet (not very easy to set up though).

Step 3 Turn on encryption

Right now your wifi network is up and running, but anyone can access it. If that doesn't bother you, then you're done. However, you might want to enable some sort of wifi encryption to protect your network and make sure that only trusted computers have access.
Different routers support different levels of encryption so what you use is up to you, though we should note that WEP encryption is trivially easy to defeat; you'll be much better off using WPA Personal or WPA Enterprise if your router supports it.

Step 4 Connect

Once you're happy with your settings, disconnect your PC and then head to your network settings tool and you should see your new wifi network listed under available networks. Select your network and type in your password (if you're using one) to connect.

In the Future

With more public wifi hotspots showing up everyday, the need for home networks is dwindling. The promise of wifi through electrical outlets could eventually eliminate the need for home networks -- streaming data from one PC to another can already be implemented over the same wires that deliver power on your doemstic circuits.

Use a TV as a Monitor


The Olevia 747i HDTV. Photo: Tom Schierlitz/WiredTelevision resolutions used to be horribly inferior to computer monitors. Today's televisions are different; they have resolutions that are not only getting closer in framerate to computer monitors, their resolutions are getting downright competitive. In fact, if you're looking to stretch your budget, you might want to double up the task and use your television as a monitor. Here's how.

Contents

What you'll need

You'll definitely want to use a high definition (HD) television with your computer. Older, standard definition television resolutions are such that windows and graphics look far too blurry to do many of the tasks a computer is meant for. Beyond that, the connections on the back of newer HDTVs are much more compatible with the graphical demands of computers. Of course, this doesn't mean you can get a little creative with your hand me down cathode-ray-tube (CRT) television. Simply lower your expectations a little bit in the process.

Using a Video Card

Newer video cards actually do the hard work of complying to television standards for you. The buzzword you'll be looking for when looking for a video card compatible with your HDTV is "HDMI." High-Definition Multimedia Interface is a new standard that allows encrypted audio and digital signals to be transmitted over a single cable, as opposed to the many RCA cables you might be used to. Video cards with HDMI ports are getting more and more common.

Using DVI or AVI ports

Some televisions are now equipped with the basic ports used for computer monitors. In many cases, this is all you need to hook up your computer to any standard computer. Simply use a basic DVI or AVI monitor cable to connect your computer to your television. Check the back of your television or your television's manual to find out if your television has a DVI or AVI port.

Extending Your Desktop

Once your television is hooked up to your computer, most operating systems will automatically detect the television as if it were another monitor:
  1. Ensure the television is switched on and set to the correct "input." For example, if you are using an HDMI cable in port 1, ensure the video input setting is set to "HDMI 1" or similar
  2. In your display preferences (found in your control panel or system settings), click Detect displays(Mac) or Detect (Windows). Your operating system will automatically look for the standard settings and drivers to find and install your television.
  3. If you have an existing monitor and are looking to use your television as a second screen, you'll want to select Extend these displays or similar to extend your desktop across screens

In the future

The difference in resolution and quality between televisions and computer monitors is getting more and more minute. In fact, the future of televisions and monitors are one and the same. In many ways, the only difference is the speakers built-in to televisions are absent in computer monitors.
Newer televisions are hooking into the internet, in many ways subjugating the need for a computer in the first place. Looking for the future of computers? Look no further than your television.

Upgrade Your Hard Drive to a Solid State Drive

Intel Solid-State Drives are a reliable alternative to traditional hard drives, offering breakthrough storage performance. Intel SSD provides your PC experience with to a new level of responsiveness -- including faster boot-up, application launch and file loading.
Image by Intel

Contents

 
  1. Before you begin any system upgrade, you'll want to back-up all critical data
  2. After you've saved your critical data power down your system making sure to unplugging and removing the battery if a notebook
  3. Now open your system chassis (notebook or desktop) and examine the current hard drive configuration to determine if it's a PATA or SATA connection. The cable connecting a PATA hard drive uses a ribbon cable with 40 wires. By comparison, a SATA cable only has 7 wires. If your notebook system is not already configured to support a SATA drive, you will not be able to upgrade to an Intel SSD. If you're upgrading a desktop system from PATA to SATA, you'll need to first secure the correct cables to upgrade your PATA system to SATA before progressing with this SSD upgrade

How to proceed

There are two primary ways to upgrade to a solid state drive. The easiest manner is with a hard drive upgrade kit or the more difficult being a fresh system OS install.

Hard Drive Upgrade Kit

The easiest approach would be to use a drive cloning kit. For example the Apricorn EZ Upgrade Kit (www.apricorn.com) had everything you need to upgrade your system to an Intel SSD. Using a cloning kit will streamline the process of having to reinstall all programs, OS, drivers and data files by automatically migrating your existing hard drive image to the new Intel SSD. Use of a hard drive upgrade kit has three primary steps:
  1. Put your Intel SSD into the external drive enclosure supplied with the upgrade kit.
  2. Clone your drive image using the upgrade kit's provided software.
  3. Swap out the system hard drive for your freshly cloned SSD.

Fresh System OS Install
Keep care of your old hard drive as it still maintains the original data and can now be used as a back-up.
WARNING this will erase any data on your current systems hard drive – this is not for novice users.
You need to ensure you have either purchased an operation system (OS) disk such as Window 7 or you have the system restore disk provided with the system at purchase. Before you go any further back-up all critical data. Once you've backed up your data and powered down your system, open the chassis and replace existing drive with the Intel SSD drive. Close the chassis and reboot your system. You'll need to boot from the OS (or system restore) disk. Once you've booted from the OS disk follow the onscreen instructions provided from the OS vendor. After the OS has been installed you'll now need to load the corresponding drivers for your system based upon the hardware configuration.

Lijit Ad Wijit

add this

Related Posts Plugin for WordPress, Blogger...